6082 T6 Aluminium Sheet
Aluminium 6082 Sheet is a medium strength alloy with excellent corrosion resistance. 6082 Aluminium Sheet has the highest strength of the 6000 series alloys. Alloy 6082 Sheet is known as a structural alloy. In Sheet form, 6082 is the alloy most commonly used for machining. As a relatively new alloy, the higher strength of 6082 has seen it replace 6061 in many applications. The addition of a large amount of manganese controls the grain structure which in turn results in a stronger alloy.
| Standard Dimensions of 6082 T6 Aluminium Sheet: |
| Alloy | ASTM B209 1050, 1060, 1100, 1235, 3003, 3004, 3105, 5052, 5754, 6061, 8011 |
| Aluminium 6082 T6 Sheet Temper | O, H12, H14, H16, H18, H22, H24, H26, H32, H112 |
| Aluminium 6082 T6 Sheet Thickness | 0.5mm-150mm |
| Aluminium 6082 T6 Sheet Width | 500-2000mm |
| Aluminium 6082 T6 Sheet Length | to clients’ requirement |
| Aluminium 6082 T6 Sheet Coating | Polyester, Fluorocarbon, polyurethane and epoxy coating |
| 6082 T6 Aluminium Sheet Coating finish | PVDF, POLYESTER(PE) |
| Surface | Bright, polished, hair line, brush, sand blast, checkered, embossed, etching, etc. |
| Gloss | Meet the customer requirement |
| Total coating thickness | PVDF coating: More than 25 micron; Polyester coating: More than 18 micron |
| Coating hardness | (pencil hardness) more than 2H |
| Coating adhesive | No lower than1st grade |
| Impact resistance | No cracking or peeling (50kg/cm, ASTMD-2794: 1993) |
| Flexibility (T-bend) | 2T |
| MEK resistance | More than 10 |
| Available Aluminium 6082 T6 Sheet Stock Sizes | 1ft x 1ft, 1ft x 2ft, 1ft x 4ft, 2ft x 2ft, 2ft x 4ft, 4ft x 4ft, 4ft x 8ft, 4ft x 10ft or Cut to Size or Custom Shape. |
| Aluminium 6082 T6 Sheet Delivery Time | 30-60 days after receiving the prepayment |
| Aluminium 6082 T6 Alclad Sheet Packaging Details | Standard export package. One pallet is about 2-3 ton.Two steel belts in width and three in width. One 20GP container can load about 18-20 tons Aluminium 6082 T6 Sheet. One 40GP container can load about 24 tons Aluminium 6082 T6 Sheet |
| ASTM B209 Alloy 6082 T6 Outer packing | Export standard, wooden pallet |
| Bottom side Aluminium 6082 T6 Sheet is coated with protective polyester material, thickness more than 6 micron | |
| Export to | Singapore, Indonesia, Ukraine, Korea, Thailand, Vietnam, Saudi Arabia, Brazil, Spain, Canada, USA, Egypt, Iran, China, Kuwait, Dubai, Oman, Kuwait, Peru, Mexico, Iraq, Russia, Malaysia, etc. |
| 6082 T6 Aluminium Sheet Products Show: |
| ALLOYS | SPECIFICATIONS |
|---|---|
| 1100 | AMS-4001, 4003, QQ-A-250/1 |
| 2014-BARE | AMS-4028, 4029 |
| 2014-ALCLAD | QQ-A-250/3 |
| 2024-BARE | AMS-4035,37, QQ-A-250/4 |
| 2024-ALCLAD | AMS-4040, 41, QQ-A-250/5 |
| 2124 | AMS-4101, QQ-A-250/29 |
| 2219 | AMS-4031, 94, 95, QQ-A-250/30 |
| 3003 | AMS-4006, 4008, QQ-A-250/2 |
| 5052 | AMS-4015, 16, 17, QQ-A-250/8 |
| 6013 | AMS-4347, 4216 |
| 6061 | AMS-4025, 26, 27, QQ-A-250/11 |
| 7050 | AMS-4050, 4201, BMS-7-194 |
| 7075-BARE | AMS-4044, 45, QQ-A-250/12 |
| 7075-ALCLAD | AMS-4048, 49, QQ-A-250/13 |
| 7178-BARE | QQ-A-250/14 |
| 7178-ALCLAD | QQ-A-250/15 |
| 7475 | AMS-4084, 4085 |
| Sizes: | .008 to .249 x R/W x R/L .250 to 18.00 x R/W x R/L |
Please note: Other alloys available upon request
* Special Tolerances Available
* Polishing & PVC Protected
| Standard Specification of 6082 T6 Aluminium Sheet: |
| Specification | Alloy | Temper | Company |
|---|---|---|---|
| Europe | |||
| EN 2089/2395 | 2014A | T6(T62)/T4(T42) | |
| EN 2087/2088 | 2014A clad | T6(T62)/T4(T42) | |
| EN 4101 | 2024 | T4 | |
| EN 2090/2091/2703/4001 | 2024 clad cmq | T3/T4/T4(T42)/T351 | |
| EN 3474/3997/3998/3999 | 2024 cmq | T81/T3/T4(T42)/T351 | |
| EN 2694/EN 3341 | 6061 | T6(T62)/T4(T42) | |
| EN 4449/4450 | 7050 | T76/F(T762) | |
| EN 2696 | 7075 | T6(T62) | |
| EN 2092 | 7075 clad | T6(T62) | |
| EN 2802/3333 | 7475 | T761/F(T762) | |
| EN 2803/3332 | 7475 clad | T761/F(T762) | |
| France | |||
| AIR 9048.010/.030/ | 2014 | F(T42)/F(T62)/T4/ | |
| .020/.040/.050 | 2014 | T6/T451 | |
| AIR 9048.060/.080/.070/.090 | 2014 clad | F(T42)/F(T62)/T4/T6 | |
| AIR 9048.100/.110/.120 | 2024 | ||
| AIR 9048.130/.140 | 2024 clad | F(T42)/T3 | |
| AIR 9048.150 | 2618A | H28(T62) | |
| AIR 9048.170 | 2618A clad | H28(T62) | |
| AIR 9048.190/.200 | 5086 | O, H111/H22, H32 | |
| AIR 9048.210/.220/.230/.240 | 6061 | O, H111(T42)/T4/ O, H111(T62)/T6 | |
| AIR 9048.260/.270 | 7075 | T6/T76 | |
| AIR 9048.280 | 7075 clad | T6 | |
| AIR 9048.290 | 7475 | T76 | Boeing |
| Germany | |||
| W.-Nr. 3.1254 | 2014A | T4, T6 | |
| W.-Nr. 3.1354 | 2024 | O(T42), T3 | |
| W.-Nr. 3.1364 | 2024 clad | O(T42), T3 | |
| W.-Nr. 3.3214 | 6061 | O(T62), T6 | |
| W.-Nr. 3.4364 | 7075 | T6 | |
| W.-Nr. 3.4374 | 7075 clad | O(T62), T6 | |
| W.-Nr. 3.4377 | 7475 clad | T76 | |
| UK | |||
| BS L16/17 | 1200 | H4/O | |
| BS L156/157/158*/159* | 2014A | ||
| 158*/159* | 2014A clad | (T42)(T62) | BAE Systems |
| BS L163/164/165 | 2014A clad | T3/F(T42), T4/T6 | |
| BS L166*/167* | 2014A clad | F(T42), T4/T6 | |
| BS L109/110 | 2024 clad | T3/F(T42) | |
| DTD5070 | 2618A clad | T6 | |
| BS L59/60/61 | 3103 | H6/H2/O | |
| BS L80/81 | 5251 | O/H6 | |
| BS L113 | 6082 | T4, T6 | |
| BS L88 | 7075 clad | T6 | |
| USA | |||
| AMS QQ-A-250/3 | 2014 clad | O, T4, T6 | |
| AMS QQ-A-250/4 | 2024 | O, T3 | |
| AMS 4037 | 2024 | T3 | |
| AMS QQ-A-250/5 | 2024 clad | O, T3 | |
| AMS 4041 | 2024 clad | T3 | |
| AMS QQ-A-250/30 | 2219 | O(T62), T31(T81), T37(T87) | |
| AMS QQ-A-250/2 | 3003 | O, H14 | |
| AMS 4347 | 6013 | T4 | |
| AMS 4216 | 6013 | T6 | |
| AMS 4025/4026/4027 | 6061 | O, F, T4, T42, T45, T6, T62, T651 | |
| AMS QQ-A-250/12 | 7075 | O, T6, T73 | |
| AMS QQ-A-250/24 | 7075 | T76 | |
| AMS QQ-A-250/13 | 7075 clad | O, T6, T73 | |
| AMS QQ-A-250/26 | 7075 clad with 7011 | T76 | |
| AMS QQ-A-250/25 | 7075 clad with 7072 | T76 | |
| European Standard | BS (OLD) | USA (AA) | GERMANY (DIN) | ISO | IS | Canadian |
|---|---|---|---|---|---|---|
| EN AW-1050 A | 1E | 1050 | Al99.5 | Al99.5 | 19500, 19501 | 1 S |
| EN AW-1070 A | – | 1070 | Al-99.7 | Al-99.7 | 19700 | – |
| EN AW-1100 | IC | 1100 | Al-99.0 | Al-99.0 | 19000 | 2 S |
| EN AW-2011 | FC1 | 2011 | AlCuBiPb | AlCu6BiPb | – | 28S |
| EN AW-2014 | HE15 | 2014 | AlCuSiMn | AlCu4SiMg | 24345 | B26S |
| EN AW-2024 | – | 2024 | AlCuMg2 | AlCu4Mg1 | – | 24 S |
| EN AW-3003 | N3 | 3003 | AlMnCu | AlMn1Cu | 31000 | 3 S |
| EN AW-3103 | – | 3103 | – | AlMn1 | – | – |
| EN AW-6101A | E91E | 6101 | E AlMgSi 0.5 | E AlMgSi(A) | 63401 | D50S |
| EN AW-6005 | – | 6005 | AlMgSi0.7 | AlSiMg | 62400 | C51S |
| EN AW-6351 | HE30 | 6351 | AlMgSi1 | AlSiMg0.5Mn | 64430 | B51S |
| EN AW-6060 | – | 6060 | AlMgSi 0.5 | AlMgSi | – | – |
| EN AW-6061 | HE20 | 6061 | AlMgSiCu | AlMg1SiCu | 65032 | 65S |
| EN AW-6063 | HE9 | 6063 | AlMgSi0.5 | AlMg0.7Si | 63400 | 50S |
| EN AW-6082 | HE30 | 6351 | AlMgSi1 | AlSi1MgMn | 64430 | B51S |
| 6082 T6 Aluminium Sheet Sizes: |
| Sizes (mm) | Theoretical Mass KG/sheet |
|---|---|
| 2000 X 1000 X 0.5 | 2500 X 1250 X 0.5 |
| 2000 X 1000 X 0.7 | 2500 X 1250 X 0.7 |
| 2000 X 1000 X 0.9 | 2500 X 1250 X 0.9 |
| 2000 X 1000 X 1.2 | 2500 X 1250 X 1.2 |
| 3000 X 1500 X 1.2 | 2000 X 1000 X 1.6 |
| 2500 X 1250 X 1.6 | 3000 X 1500 X 1.6 |
| 2000 X 1000 X 2.0 | 2500 X 1250 X 2.0 |
| 3000 X 1500 X 2.0 | 2500 X 1250 X 2.5 |
| 2.79 | 4.36 |
| 3.91 | 6.10 |
| 5.02 | 7.85 |
| 6.74 | 10.46 |
| 15.01 | 8.93 |
| 13.95 | 20.09 |
| 11.16 | 17.44 |
| 25.11 | 21.80 |
| 6082 T6 Aluminium Sheet Weight Chart: |
Width: 1.000 mm | Length: 2.000 mm
| Product | Thickness | Weight |
|---|---|---|
| 6082 T6 Aluminium Sheet | 0,30 mm | 0,810 Kg/m2 |
| 6082 T6 Aluminium Sheet | 0,40 mm | 1,080 Kg/m2 |
| 6082 T6 Aluminium Sheet | 0,50 mm | 1,350 Kg/m2 |
| 6082 T6 Aluminium Sheet | 0,60 mm | 1,620 Kg/m2 |
| 6082 T6 Aluminium Sheet | 0,70 mm | 1,890 Kg/m2 |
| 6082 T6 Aluminium Sheet | 0,80 mm | 2,160 Kg/m2 |
| 6082 T6 Aluminium Sheet | 0,90 mm | 2,430 Kg/m2 |
| 6082 T6 Aluminium Sheet | 1,00 mm | 2,700 Kg/m2 |
| 6082 T6 Aluminium Sheet | 1,20 mm | 3,240 Kg/m2 |
| 6082 T6 Aluminium Sheet | 1,40 mm | 3,780 Kg/m2 |
| 6082 T6 Aluminium Sheet | 1,50 mm | 4,050 Kg/m2 |
| 6082 T6 Aluminium Sheet | 1,60 mm | 4,320 Kg/m2 |
| 6082 T6 Aluminium Sheet | 1,80 mm | 4,860 Kg/m2 |
| 6082 T6 Aluminium Sheet | 2,00 mm | 5,400 Kg/m2 |
| 6082 T6 Aluminium Sheet | 2,20 mm | 5,940 Kg/m2 |
| 6082 T6 Aluminium Sheet | 2,50 mm | 6,750 Kg/m2 |
| 6082 T6 Aluminium Sheet | 3,00 mm | 8,100 Kg/m2 |
| 6082 T6 Aluminium Sheet | 4,00 mm | 10,800 Kg/m2 |
| 6082 T6 Aluminium Sheet | 5,00 mm | 13,500 Kg/m2 |
| 6082 T6 Aluminium Sheet | 6,00 mm | 16,200 Kg/m2 |
| 6082 T6 Aluminium Sheet | 10,00 mm | 27,000 Kg/m2 |
| 6082 T6 Aluminium Sheet | 12,00 mm | 32,400 Kg/m2 |
| 6082 T6 Aluminium Sheet | 15,00 mm | 40,500 Kg/m2 |
| 6082 T6 Aluminium Sheet | 20,00 mm | 54,000 Kg/m2 |
| 6082 T6 Aluminium Sheet Chemical Composition: |
| Alloy | % Si |
% Mg |
% Mn |
% Cu |
% Fe |
% Cr |
% Zn |
% Ti |
% Others |
% Al |
| EN AW-6082 | 0.70 – 1.30 | 0.60 -1.20 | 0.40 – 1.00 | 0.10 Max | 0.50 Max | 0.25 Max | 0.20 Max | 0.10 Max | – | Remainder |
| Aluminium 6082 T6 Sheet Mechanical Properties: |
| Alloy | Temper | UTS (Mpa) | Yield Strength (Mpa) | Elongation (%) | ||
|---|---|---|---|---|---|---|
| Minimum | Maximum | Minimum | Maximum | A 50mm (Minimum) | ||
| EN AW-6082 | O | – | 160 | – | 110 | 12 |
| T4 | 205 | – | 110 | – | 12 | |
| T5 | 270 | – | 230 | – | 6 | |
| T6 | 290 | – | 250 | – | 6 | |
| Alloy Designation | UK Specifications |
US Specifications |
US Federal Specifications |
European Specifications |
Other |
|---|---|---|---|---|---|
| 6082 A96082 |
BS L111 Alloy 6082-T6 Bars and Sections BS L112 Alloy 6082 Forging Stock and Forgings BS L113 Alloy 6082-T6 Sheet and Strip BS L114 Alloy 6082-T6 Tube Drawn BS L115 Alloy 6082-T651 Plate BS HE30 6082 Extrusions BS HP30 6082 Plate BS HT30 6082 Tube BS HG30 6082 Wire BS HS30 6082 Sheet |
WS 3.2315 EN 2326 6082-T6 Extruded bar EN 2636 6082-T6 Bar (with peripheral coarse grain control) EN 4273 EN 4274 (with peripheral coarse grain control) |
Alcoa-920 Birmetal-071 BA 25 Durcilium-S Hiduminium-44 Anticorodal-090 AlMgSi1Mn A-SGM0.7 AECMA 2389 Tube AECMA 2390 Tube UNI 3571 UNI 9006/4 L-3453 |
Aluminum Alloy Heat Treatment Temper Designations
Basic Aluminum Heat Treatment Designations
- F As Fabricated
- O Annealed
- H Strain Hardened
- W Solution Heat Treated
- T Solution Heat Treated
Heat Treating T Temper Codes
- T1 – Cooled from an elevated temperature shaping process and naturally aged to a substantially stable condition.
- T2 – Cooled from an elevated temperature shaping process, cold worked, and naturally aged to a substantially stable condition.
- T3 – Solution heat treated, cold worked, and naturally aged to a substantially stable condition.
- T4 – Solution heat treated, and naturally aged to a substantially stable condition.
- T5 – Cooled from an elevated temperature shaping process then artificially aged.
- T6 – Solution heat treated then artificially aged.
- T7 – Solution heat treated then overaged/stabilized.
- T8 – Solution heat treated, cold worked, then artificially aged.
- T9 – Solution heat treated, artificially aged, then cold worked.
- T10 – Cooled from an elevated temperature shaping process, cold worked, then artificially aged.
Additional digits may be used after the first T temper digit to indicate subsequent stress relieving by processes such as stretching, compressing, or a combination.
H Temper Strain Hardening Codes
- H1 – Strain hardened only
- H2 – Strain hardened and partially annealed
- H3 – Strain hardened and stabilized
- H4 – Strain hardened and lacquered or painted. This assumes that thermal affects from the coating process affect the strain hardening; seldom encountered.
Application of 6082 T6 Aluminium Sheet
Sasa Aluminium 6082 T6 Aluminium Sheet is the most widely used form of Industrial Aluminium. 6082 T6 Aluminium Sheets find applications in various industries such as manufacturing cans and packages, transportation, home appliances, building and construction.
6082 T6 Aluminium Sheet Applications
