6A02 T6 Aluminum Tube
6A02 T6 aluminum tubes refer to a specific type of aluminum alloy tubes. The alloy is a variation of 5083 aluminum alloy, with "T6" indicating that it has undergone heat treatment and cold working to achieve a specific hardness state. These tubes are commonly used in applications such as shipbuilding, marine engineering, and other scenarios requiring high corrosion resistance and strength. The H32 state of the 6A02 aluminum alloy strikes a balance between strength and hardness while maintaining good corrosion resistance
| Specifications of 6A02 T6 Aluminum Tube: |
| Grade | 5A06O,5652, 5086, 5056, 5754, 6061, 6062, 6063, 7075, 6A02 T6 etc. |
| Standard | GB/T 4437.1 |
| Sizes | 1/8″ – 16″ (3mm – 2500mm) OD .020″ – 2″ (.2mm – 150mm) wall (1m-12m) Length |
| Technology |
Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
| Form | Extruded |
| Temper | O, T1,T4,T6 |
| Surface | Anodized, Oxidation, electrophoresis coating, fluorine carbon spraying |
| Mill Test Certificate | EN 10204 3.1 or EN 10204 3.2 |
| CHEMICAL COMPOSITION OF 6A02 Aluminum Tube: |
| Grade | Al | Mg | Si | Fe | Cu | Zn | Ti | Mn | Cr |
| 6A02 |
Bal | 0.45-0.9 | 0.5-1.2 | 0.5 | 0.2-0.6 |
0.25 |
0.15-0.4 |
0.15-0.35 |
0.45-0.9 |
| Quality Assurance (including both Destructive and Non-Destructive) : |
1. Visual Dimension Test
2. Mechanical examining like tensile, Elongation and reduction of area.
3. Ultrasonic test
4. Chemical examination analysis
5. Hardness test
6. Pitting protection test
7. Penetrant Test
8. Intergranular Corrosion Testing
9. Impact analysis
10. Metallography Experimental Test
| Why Choose Us ? |
1. You can get the perfect material according to your requirement at the least possible price.
2. We also offer Reworks, FOB, CFR, CIF, and door to door delivery prices. We suggest you to do deal for shipping which will be quite economical.
3. The materials we provide are completely verifiable, right from raw material test certificate to the final dimensional statement.(Reports will show on requirement)
4. We guarantee to give a response within 24hours(usually in the same hour)
5. Provide SGS TUV report.
6. We are fully dedicated to our customers. If it will not possible to meet your requirements after examining all options, we will not mislead you by making false promises which will create good customer relations.
7.Provide one-stop service.
| 6A02 T6 aluminum tube Packing: |
1. Packing is quite important especially in a case of international shipments in which consignment pass through various channels to reach the ultimate destination, so we put special concern regarding packaging.
2. Sasa aluminum’s pack our goods in numerous ways based on the products. We pack our products in multiple ways, such as
