7039 Aluminium Plate

Short Description:


  • Temper: O, H12, H14, H16, H18, H22
  • Thickness: 0.5mm-150mm
  • Width: 500-2000mm
  • Surface: Polished, hair line, brush, sand blast
  • Product Detail

    FAQ

    Product Tags

    The only high strength, wrought, 7000 series aluminum alloy with a military specification is the 7039 aluminum Plate, controlled by MIL-DTL-46063H(MR). Aluminium / aluminum 7039 Plate is a heat treatable wrought alloy. The 7075 Aluminium Plate is similar to 7039 aluminum armor plate, but with higher strength.

    Sasa Aluminium is the leading manufacturer and exporter of 7039 Aluminium Plate. Supplier of ASTM B209 7039 Aluminium Plate from 0.5mm to 5mm Thick 1000mm x 1000mm to 2500mm x 1250mm Tempers manufactured in accordance with international standards ASTM B209, ASTM-B-209, EN573, and EN485, check 7039 Aluminium Plate price. The general widths of 7039 H16 Aluminum Plates are 1000mm, 1250mm and 1500mm, while common lengths are 2000mm, 2500 mm and 3000mm respectively. Wholesale Trader of 7039 Commercial Aluminium Plate offered by Sasa Aluminium , China. Stockist of 7039 Aluminium Plate, H32 7039 Aluminium Stucco Plate, H38 Commercial 7039 Aluminium Plate, ASME SB209 7039 Aluminium Patterned Plate, 7039 Mill Finish, 7039 Aluminium Extruded Plate, 7039 Aluminium Plate and 7039 Aluminium Plate in China.

    Standard Dimensions of 7039 Aluminium Plate:
    Aluminium Alloy ASTM B209 7039
    Aluminium 7039 Plate Temper O, H12, H14, H16, H18, H22, H24, H26, H32, H112
    Aluminium 7039 Plate Thickness 0.5mm-150mm
    Aluminium 7039 Plate Width 500-2000mm
    Aluminium 7039 Plate Length to clients’ requirement
    Aluminium 7039 Plate Coating Polyester, Fluorocarbon, polyurethane and epoxy coating
    7039 Aluminium Plate Coating finish PVDF, POLYESTER(PE)
    Aluminium 7039 Plate Surface Polished, hair line, brush, sand blast, checkered, embossed, etching, etc.
    Mill finish, Bright finish, paper interleaved, one side film, both sides film.
    Aluminium 7039 Plate Gloss Meet the customer requirement
    Total coating thickness of Aluminium 7039 Plate PVDF coating: More than 25 micron; Polyester coating: More than 18 micron
    Aluminium 7039 Plate Coating hardness (pencil hardness) more than 2H
    Aluminium 7039 Plate Coating adhesive No lower than1st grade
    Aluminium 7039 Plate Impact resistance No cracking or peeling (50kg/cm, ASTMD-2794: 1993)
    Aluminium 7039 Plate Flexibility (T-bend) 2T
    Aluminium 7039 Plate MEK resistance More than 10
    Available Aluminium 7039 Plate Stock Sizes 1ft x 1ft, 1ft x 2ft, 1ft x 4ft, 2ft x 2ft, 2ft x 4ft, 4ft x 4ft, 4ft x 8ft, 4ft x 10ft or Cut to Size or Custom Shape.
    Aluminium 7039 Plate Delivery Time 30-60 days after receiving the prepayment
    Aluminium 7039 Plate Packaging Details Standard export package.
    One pallet is about 2-3 ton.Two steel belts in width and three in width.
    One 20GP container can load about 18-20 tons Aluminium 7039 Plate.
    One 40GP container can load about 24 tons Aluminium 7039 Plate
    ASTM B209 Alloy 7039 Plate Outer packing Export standard, wooden pallet
      Bottom side Aluminium 7039 Plate is coated with protective polyester material, thickness more than 6 micron
    We Export Aluminium 7039 Plate to Singapore, Indonesia, Ukraine, Korea, Thailand, Vietnam, Saudi Arabia, Brazil, Spain, Canada, USA, Egypt, Iran, China, Kuwait, Dubai, Oman, Kuwait, Peru, Mexico, Iraq, Russia, Malaysia, etc.

     

    Types of 7039 Aluminium Plate Manufacturer in China:

    7039 Aluminium Plate (3)      7039 Aluminium Plate (2)

    7039 Aluminium Plates Product Range
    Alloy No. Thickness
    (mm)
    Width
    (mm)
    Length
    (mm)
    Temper
    7039 Aluminium Plate 0.2-5.0 20-2200 20-8000 O, H12, H22, H14, H16, H18, H24, H26

     

    Standard Specification of 7039 Aluminium Plate:
    China
    U.S.A.
    BRITAIN
    CANADA GERMANY
    RUSSIA
    I.S.O.
    FRENCH
    New IS Old IS (A.A.)
    (B.S.)
      (DIN)
    74530 7039 D74S   3004

     

    7039 Aluminium Plate Equivalent Grades
    China
    U.S.A.
    BRITAIN
    CANADA GERMANY
    RUSSIA
    I.S.O.
    FRENCH
    New IS Old IS (A.A.)
    (B.S.)
      (DIN)
    74530 7039 D74S   3004

     

    7039 Aluminium Plate Sizes:
    Sizes (mm) Theoretical Mass KG/Plate
    2000 X 1000 X 0.5 2500 X 1250 X 0.5
    2000 X 1000 X 0.7 2500 X 1250 X 0.7
    2000 X 1000 X 0.9 2500 X 1250 X 0.9
    2000 X 1000 X 1.2 2500 X 1250 X 1.2
    3000 X 1500 X 1.2 2000 X 1000 X 1.6
    2500 X 1250 X 1.6 3000 X 1500 X 1.6
    2000 X 1000 X 2.0 2500 X 1250 X 2.0
    3000 X 1500 X 2.0 2500 X 1250 X 2.5
    2.79 4.36
    3.91 6.10
    5.02 7.85
    6.74 10.46
    15.01 8.93
    13.95 20.09
    11.16 17.44
    25.11 21.80

     

    7039 Aluminium Plate Weight Chart:

    Width: 1.000 mm | Length: 2.000 mm

    dsadasdas

    Product Thickness Weight
    7039 Aluminium Plate 0,30 mm 0,810 Kg/m2
    7039 Aluminium Plate 0,40 mm 1,080 Kg/m2
    7039 Aluminium Plate 0,50 mm 1,350 Kg/m2
    7039 Aluminium Plate 0,60 mm 1,620 Kg/m2
    7039 Aluminium Plate 0,70 mm 1,890 Kg/m2
    7039 Aluminium Plate 0,80 mm 2,160 Kg/m2
    7039 Aluminium Plate 0,90 mm 2,430 Kg/m2
    7039 Aluminium Plate 1,00 mm 2,700 Kg/m2
    7039 Aluminium Plate 1,20 mm 3,240 Kg/m2
    7039 Aluminium Plate 1,40 mm 3,780 Kg/m2
    7039 Aluminium Plate 1,50 mm 4,050 Kg/m2
    7039 Aluminium Plate 1,60 mm 4,320 Kg/m2
    7039 Aluminium Plate 1,80 mm 4,860 Kg/m2
    7039 Aluminium Plate 2,00 mm 5,400 Kg/m2
    7039 Aluminium Plate 2,20 mm 5,940 Kg/m2
    7039 Aluminium Plate 2,50 mm 6,750 Kg/m2
    7039 Aluminium Plate 3,00 mm 8,100 Kg/m2
    7039 Aluminium Plate 4,00 mm 10,800 Kg/m2
    7039 Aluminium Plate 5,00 mm 13,500 Kg/m2
    7039 Aluminium Plate 6,00 mm 16,200 Kg/m2
    7039 Aluminium Plate 10,00 mm 27,000 Kg/m2
    7039 Aluminium Plate 12,00 mm 32,400 Kg/m2
    7039 Aluminium Plate 15,00 mm 40,500 Kg/m2
    7039 Aluminium Plate 20,00 mm 54,000 Kg/m2

     

    7039 Aluminium Plate Chemical Composition:
    Alloy (ISS) Equivalent alloy (A.A) Copper Magnesium Silicon Iron Managanese Others* (Total) Remarks
    Old New U.S.A Min. Max. Min. Max. Min. Max. Min. Max. Max Max. Aluminum 99.0% Min. 
    74530 7039 0.2 1.0 1.5 0.4 0.7 0.2 0.7 0.4 Zinc (5.1-6.1) & Chromium (0.2-0.28)

     

    Aluminium 7039 Plate Mechanical Properties:
    Properties Metric Imperial
    Tensile strength (@diameter 12.7 mm/0.500 in) 450 MPa 65300 psi
    Yield strength (@diameter 12.7 mm/0.500 in) 380 MPa 55100 psi
    Elongation at break (@diameter 12.7 mm/0.500 in) 13% 13%
    Elastic modulus 69.6 GPa 10100 ksi
    Shear strength 255 MPa 37000 psi
    Hardness, Brinell (@load 500 kg; thickness 10.0 mm/1100 lb;0.394 in) 133 133
    Hardness, Knoop (converted from Brinell hardness value) 167 167
    Hardness, Rockwell A (converted from Brinell hardness value) 50 50
    Hardness, Rockwell B (converted from brinell hardness value) 81 81
    Hardness, Vickers (converted from Brinell hardness value) 153 153

    Aluminum Alloy Heat Treatment Temper Designations

    Basic Aluminum Heat Treatment Designations

    • F As Fabricated
    • O Annealed
    • H Strain Hardened
    • W Solution Heat Treated
    • T Solution Heat Treated

    Heat Treating T Temper Codes for Aluminium 7039 Plates

    • T1 – Cooled from an elevated temperature shaping process and naturally aged to a substantially stable condition.
    • T2 – Cooled from an elevated temperature shaping process, cold worked, and naturally aged to a substantially stable condition.
    • T3 – Solution heat treated, cold worked, and naturally aged to a substantially stable condition.
    • T4 – Solution heat treated, and naturally aged to a substantially stable condition.
    • T5 – Cooled from an elevated temperature shaping process then artificially aged.
    • T6 – Solution heat treated then artificially aged.
    • T7 – Solution heat treated then overaged/stabilized.
    • T8 – Solution heat treated, cold worked, then artificially aged.
    • T9 – Solution heat treated, artificially aged, then cold worked.
    • T10 – Cooled from an elevated temperature shaping process, cold worked, then artificially aged.

    Additional digits may be used after the first T temper digit to indicate subsequent stress relieving by processes such as stretching, compressing, or a combination.

    H Temper Strain Hardening Codes for Aluminium 7039 Plates

    • H1 – Strain hardened only
    • H2 – Strain hardened and partially annealed
    • H3 – Strain hardened and stabilized
    • H4 – Strain hardened and lacquered or painted. This assumes that thermal affects from the coating process affect the strain hardening; seldom encountered.

    Application of 7039 Aluminium Plate

    7039 Aluminium Plate is the most widely used form of Industrial Aluminium. 7039 Aluminium Plates find applications in various industries such as manufacturing cans and packages, transportation, home appliances, building and construction.

    dsadasdas


  • Previous:
  • Next:

  • Related Products