Aluminum Alloy 1100 coils are highly sought after for their versatility and properties. These coils are typically manufactured through a process of hot rolling or cold rolling, depending on the desired thickness and mechanical properties. Aluminum Alloy 1100 is known for its excellent formability, corrosion resistance, and conductivity, making it suitable for a wide range of applications such as in the automotive industry for heat exchangers, in construction for roofing and siding, and in the food industry for packaging.
Specifications of 1100 Aluminum Coil: |
Grade |
7075
|
Standard |
ASTM B209 / ASME SB209
|
Thickness |
0.1-4mm |
Temper
|
O, H12, H14, H16, H18, H22, H24, H26, H32, H112 |
Width |
500-2000mm |
Surface |
Bright, polished, hair line, brush, sand blast, embossed, etching, etc. |
Type |
Hot-Rolled (HR) / Cold-Rolled (CR) Coil |
CHEMICAL COMPOSITION OF 1100 Aluminum Coils: |
Grade |
Al |
Si |
Ti |
Mn |
Mg |
Fe |
Cu |
Zn |
1100 |
Remainder |
0.25-0.35 |
0.020-0.030
|
0.01-0.05
|
0.01-0.03 |
0.35-0.50 |
0.05-2.0 |
0.01-0.05 |
1100 Aluminum Coil Mechnical Properties: |
Alloy |
Temper |
UTS(Mpa) |
% Elongation |
|
|
1100 |
0.5 mm -0.8 mm |
0.81 mm – 1.30 mm |
1.30 mm – above |
O |
75-110 |
20 |
25 |
29 |
H12 |
95-130 |
5 |
6 |
7 |
H14 |
110-145 |
3 |
4 |
5 |
H16 |
130-165 |
2 |
3 |
4 |
H18 |
150 |
2 |
2 |
3 |
Quality Assurance (including both Destructive and Non-Destructive) : |
1. Visual Dimension Test
2. Mechanical examining like tensile, Elongation and reduction of area.
3. Ultrasonic test
4. Chemical examination analysis
5. Hardness test
6. Pitting protection test
7. Penetrant Test
8. Intergranular Corrosion Testing
9. Impact analysis
10. Metallography Experimental Test
1. You can get the perfect material according to your requirement at the least possible price.
2. We also offer Reworks, FOB, CFR, CIF, and door to door delivery prices. We suggest you to do deal for shipping which will be quite economical.
3. The materials we provide are completely verifiable, right from raw material test certificate to the final dimensional statement.(Reports will show on requirement)
4. We guarantee to give a response within 24hours(usually in the same hour)
5. Provide SGS TUV report.
6. We are fully dedicated to our customers. If it will not possible to meet your requirements after examining all options, we will not mislead you by making false promises which will create good customer relations.
7.Provide one-stop service.
1. Packing is quite important especially in a case of international shipments in which consignment pass through various channels to reach the ultimate destination, so we put special concern regarding packaging.
2. Sasa aluminum’s pack our goods in numerous ways based on the products. We pack our products in multiple ways, such as
Previous: 7075 Aluminum Coil
Next: 6A02 Aluminum plate