Aluminium Strip

A finished Aluminium product such as strip which has been wound or coiled after rolling. These Aluminium Strips are available in Al 99.5 and E-Al 99.7 pure aluminium 1050, 1060, 1070, 1100, 1145, 1200, 1350, 2024, 3003, 3004, 3005, 3104, 5005, 5050, 5052, 5056, 5182, 5252, 5657, 5754, 6061, 7075, 8006, 8011, 8079, 9020. Re-rolled aluminum strip available in a wide range of precise thickness and width capabilities for consistent and tight gauge tolerances.

Aluminium Strip ASTM B209, ASTM B928

Sasa Aluminium Incorporation is the leading manufacturer and exporter of Aluminium Strip. Supplier of ASTM B209 Aluminium Strip in Tempers manufactured in accordance with international standards ASTM B209, ASME SB 221, EN573, and EN485, check Aluminium Strip price. Wholesale Trader of Commercial Aluminium Strip offered by Sasa Aluminium , China. Stockist of Aluminium Strip, Mill Finish Strip, / Cold Finished Strip and Aluminium Cold Drawn Strip in China.

Packing : Export wooden pallets. The bundle wegiht not exceed 2MT. Loading:by 1x20GP

The inner size of container is below:

• 20ft GP: 5.8m(length) x 2.13m (width) x 2.18m(high) about 24-26CBM, 23MTS
• 40ft GP: 11.8m(length) x 2.13m (width) x 2.18m(high) about 54CBM, 27MTS
• 40ft HG: 11.8m(length) x 2.13m (width) x 2.72m(high) about 68CBM, 27MTS
• Standards:ASTM-B209. EN573-1, GB/T3880.1-2006

Quality of material: totally free from defects like white rust, oil patches, roll marks, edge damage, camber, dents, holes, break lines, scratches and free from coil set

Application: Mainly used insigns, billboards, building exterior decoration, bus body, high-rise buildings and factories wall decoration, kitchen sink, lamp, fan leaves, with pieces of electronic, chemical equipment, sheet metal processing parts, deep drawing or spinning hollowware, welding parts, heat exchangers, bell surface and disk, plate, kitchenware, decorations, reflective devices etc

• Tempers produced in 1050, 1100 and 3003 alloys:
  • -0- (dead soft), H12, H14, H16 and H18
• Tempers produced in 3004 and 5052 alloys:
  • -0- (dead soft), H32, H34, H36 and H38
• Tempers produced in 5182 alloy:
  • -0- (soft), other tempers upon request
• Tempers produced in 6061 alloy:Other “in between” tempers can also be provided as needed
  • -0- (soft), T4, T6

Exteruded Aluminium Strip

An extruded aluminum Strip manufacturer transforms aluminum alloy into an amazing variety of useful products. Making the most of aluminum’s malleability, the extrusion process creates shapes by heating a billet, or cylindrical log, of aluminum alloy to soften it and then forcing it under high pressure through a special steel die using a hydraulic press or ram. The end result is a piece of aluminum that will maintain the specific shape of the die.

There are two primary types of extrusion processes — direct and indirect. In the direct extrusion process, the most common method used today, the softened aluminum billet is pushed by the ram through a stationary die to create the specified shape.

Indirect extrusion involves holding the aluminum billet stationary while the die moves. The die, which is contained within the ram, presses against the metal and forces it to flow into the ram and acquire the shape of the die.

Aluminium Cold Drawn Strip

In this process, Aluminium Strip being drawn is at room temperature (i.e. Cold-Drawn). The pointed/reduced end of the bar, which is smaller than the die opening, is passed through the die where it enters a gripping device of the drawing machine. The drawing machine pulls or draws the remaining unreduced section of the bar through the die. The die reduces the cross section of the original bar, shapes the profile of the product and increases the length of the original product.

ASTM B209 Aluminium Strip

ASME SB209 Aluminium Strip: This Standard Specification for Aluminum and Aluminum-Alloy Extruded Strip

Standard Specification for Aluminum and Aluminum-Alloy Strip. This specification covers aluminum and aluminum-alloy Strip in the alloys and tempers

We supply Aluminum Strip in these tempers (H32 or H22), (H34 or H24), (H36 or H26), (H38 or H28), (H12 or H22), (H14 or H24), (H16 or H26), (H18 or H28). When ordered as H2x tempers, the maximum tensile strength and minimum yield strength do not apply. When H2x tempers are supplied instead of ordered H1x or H3x tempers, the supplied H2x temper material shall meet the respective H1x or H3x temper tensile property limits.

T72 temper is applicable only to Aluminum 2024 Strip and Alclad 2024 Strip solution heat treated and artificially overaged by the user to develop increased resistance to stress-corrosion cracking. Aluminum 2219 Strip and Alclad 2219 in the T31, T351, and T37 tempers for finished products is not recommended.

ASTM B928 Aluminium Strip

ASTM B928 / B928M, ASME SB928 Standard Specification for High Magnesium Aluminum-Alloy Strip for Marine Service and Similar Environments

This specification covers high magnesium marine application aluminum-alloy in those alloy tempers for Strip in the mill finish that are intended for marine and similar environments.

Aluminium Strip Marking & Packing

Standard seaworthy export packing: wooden pallets with plastics protection

Aluminium Strip Weight per foot

Aluminium Strip Weight Chart

Theorical Weights Table
The values presented on this table are theorical and they should be confirmed if you make an order.
We, may alter this table without notice.
All orders based on this table will be pending until confirmation by our commercial services.

Aluminium Strip Sizes

Standard Dimensions of Aluminium Strip

Cold Drawn Aluminium Strip, Cold Forming Aluminium Material Strip, EN 485-2 Aluminium Strip stockist, Aluminium Strip Price in China

Standard Specification of Aluminium Strip

Typical application of Aluminium Strip

Aluminium Strip is the most widely used form of Industrial Aluminium. Aluminium Strip find applications in various industries such as manufacturing cans and packages, transportation, home appliances, building and construction. Lighting, solar reflection, building exterior and interior decoration, ceiling, metope, furniture, cabinets, elevators, signs, Ming aluminum card, luggage, automotive interior and exterior decoration, interior decoration, such as picture frames, household appliances, refrigerators, microwave ovens, audio equipment, machinery parts processing, mold manufacturing, chemical/thermal insulation pipe coating.

• Balustrades
• Building & Construction
• Cool Rooms
• Fencing
• Louvres & Sun Protection
• Marine
• Mining & Industrial Equipment
• Signage
• Transport